|
1/2x3/4m Shark Adapter
SharkBite Push-to-Connect Adapter
Push fittings are the fastest, easiest way to join copper, CTS, CPVC, and Pex in any combination. No soldering or glue. Certified to 200 P.S.I. and 200 deg. F. Low lead. 1/2" x 3/4" MPT
View Details
|
464385 |
1/2x3/4m Shark Adapter |
6 |
10.49 |
/ EA |
U116LFA |
|
|
3/8"x1/2"m Adapter
Male iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
467189 |
3/8"x1/2"m Adapter |
4 |
9.19 |
/ EA |
U118LFA |
|
|
1/2" Mip Push Adapter
SharkBite Push-to-Connect Brass Male Adapter (Push x Male Pipe Thread)
Male iron pipe end. Brass push fitting. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
View Details
|
461806 |
1/2" Mip Push Adapter |
9 |
8.79 |
/ EA |
U120LFA |
|
|
3/4" Mip Push Adapter
SharkBite Push-to-Connect Brass Male Adapter (Push x Male Pipe Thread)
Male iron pipe end. Brass push fitting. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
View Details
|
461823 |
3/4" Mip Push Adapter |
10 |
10.99 |
/ EA |
U134LFA |
|
|
1" Mip Push Adapter
SharkBite Push-to-Connect Brass Male Adapter (Push x Male Pipe Thread)
Male iron pipe end. Brass push fitting. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
View Details
|
461832 |
1" Mip Push Adapter |
1 |
17.99 |
/ EA |
U140LFA |
|
|
1/2" Check Valve
SharkBite Push-to-Connect Brass Check Valve
The Sharkbite check valve is a general-purpose, spring-loaded check valve that can be installed in seconds on copper, CTS CPVC, and PEX. It can be installed horizontally or vertically and prevents the reverse flow of water through the water supply line in domestic water supply systems. The Shartbite push-fit fittings have been designed certified and listed to ASSE 1061/NSF 61. They are listed and certified by IAPMO. The fittings have also been certified for underground applications and as a manufactured joint without access panels. They meet UPC, IPC, and Canadian plumbing code requirements. Product is individually bagged.
View Details
|
467073 |
1/2" Check Valve |
1 |
19.49 |
/ EA |
U2008-0000LFA |
|
|
3/8"x3/8" Elbow
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
|
467177 |
3/8"x3/8" Elbow |
2 |
10.99 |
/ EA |
U246LFA |
|
|
1/2" Push Elbow
SharkBite Push-to-Connect Brass Elbow (Push x Push)
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
View Details
|
461850 |
1/2" Push Elbow |
12 |
9.99 |
/ EA |
U248LFA |
|
|
1/2x1/2f Drop Ear Elbow
SharkBite Push-to-Connect Drop Ear Elbow
For O.D. controlled copper CPVC or Pex - Certified to 200 P.S.I. and 200 deg. F. - IGC 188 and ANSI/NSF-61 certified. Meets UPC, IPC, and CUPC requirements for potable and hydronic heating water distribution. Low lead. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces. 1/2" x 1/2" F.
View Details
|
464367 |
1/2x1/2f Drop Ear Elbow |
1 |
11.99 |
/ EA |
U249LFA |
|
|
3/4" Push Elbow
SharkBite Push-to-Connect Brass Elbow (Push x Push)
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
View Details
|
461869 |
3/4" Push Elbow |
24 |
11.99 |
/ EA |
U256LFA |
|
|
1" Push Elbow
SharkBite Push-to-Connect Brass Elbow (Push x Push)
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
View Details
|
461878 |
1" Push Elbow |
3 |
21.49 |
/ EA |
U260LFA |
|
|
1/2mipx1/2" Shark Elbow
SharkBite Push-to-Connect MNPT Elbow
90 deg. MNPT elbow. For O.D. controlled copper CPVC or Pex - Certified to 200 P.S.I. and 200 deg. F. - IGC 188 and ANSI/NSF-61 certified. Low lead. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
View Details
|
464368 |
1/2mipx1/2" Shark Elbow |
1 |
9.99 |
/ EA |
U280LFA |
|
|
1/2fipx1/2" Shark Elbow
SharkBite Push-to-Connect FNPT Elbow
1/2" x 1/2" FNPT elbow. For O.D. controlled copper CPVC or Pex - Certified to 200 P.S.I. and 200 deg. F. - IGC 188 and ANSI/NSF-61 certified.
View Details
|
464376 |
1/2fipx1/2" Shark Elbow |
8 |
9.99 |
/ EA |
U308LFA |
|
|
1/2" Push Drop Ear Elbow
SharkBite Push-to-Connect Brass Drop Ear Elbow
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F, 200 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reusable. Product is individually bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
View Details
|
461921 |
1/2" Push Drop Ear Elbow |
10 |
11.99 |
/ EA |
U334LFA |
|
|
1/2x1/2f Hi-ear Elbow
SharkBite Push-to-Connect Hi-Ear Push Elbow
For O.D. controlled copper CPVC or Pex - Certified to 200 P.S.I. and 200 deg. F. - IGC 188 and ANSI/NSF-61 certified. Meets UPC, IPC, and CUPC requirements for potable and hydronic heating water distribution. 1/2" x 1/2" F.
View Details
|
464358 |
1/2x1/2f Hi-ear Elbow |
3 |
10.99 |
/ EA |
U335LFA |
|
